492 features ?zero insertion force mechanism a zif mechanism increases wear resistance and extends the connector's mating life. ?heat resistant design suitable for surface mounting this housing is made of heat resistant plastic to allow reflow soldering. ?in-line surface mount tails has an in-line surface mount tails for easy inspection. ?two types of connections the connector is available in either the normal or reverse configurations. the ffc/fpc is positioned with its mating surfaces facing upward for the normal configured connector, while the reverse configuration requires that the ffc/fpc be positioned with its mating surfaces facing down. the engineer has greater freedom in designing his circuitry. ?embossed tape for automatic mounting the flz connector can be packaged in embossed tape for automatic mounting. specifications ?current rating: 0.5a ac, dc ?voltage rating: 50v ac, dc ?temperature range: -25?c to +85?c (including temperature rise in applying electrical current) ?contact resistance: initial value/40m ? max. after environmental testing/60m ? max. ?insulation resistance: 800m ? min. ?withstanding voltage: 200v ac/minute ?applicable ffc and fpc: lead pitch/0.5mm(.020") lead width/0.35mm(.014") mating part thickness/ 0.30 0.03mm(.012" .001") < note >ffc and fpc to be actually used should be checked for applicability. * contact jst if lead-free product is required. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812 hjst this extremely small 0.5mm (.020") pitch connector with a height of only 2.0mm (.079") above the pcb surface allows interconnection in extremely small spaces and is an example of jst's leading edge technology. flz connector connectors for ffc and fpc 0.5mm (.020") pitch emboss tape 492 492 492
493 flz connector connector 4.6(.181) [0.7 (.028)] b a 3.2(.126) 0.5(.020) 1.9 (.075) 2.0 (.079) 0.2(.008) hjst b a 4.6(.181) [0.7 (.028)] 3.2(.126) 0.5(.020) 1.9 (.075) 2.0 (.079) 0.2(.008) hjst cir- cuits model no. normal type reverse type dimensions mm(in.) ab q'ty / reel material and finish 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 33 06flz-sm1-tb 07flz-sm1-tb 08flz-sm1-tb 09flz-sm1-tb 10flz-sm1-tb 11flz-sm1-tb 12flz-sm1-tb 13flz-sm1-tb 14flz-sm1-tb 15flz-sm1-tb 16flz-sm1-tb 17flz-sm1-tb 18flz-sm1-tb 19flz-sm1-tb 20flz-sm1-tb 21flz-sm1-tb 22flz-sm1-tb 23flz-sm1-tb 24flz-sm1-tb 25flz-sm1-tb 26flz-sm1-tb 27flz-sm1-tb 28flz-sm1-tb 30flz-sm1-tb 33flz-sm1-tb 06flz-rsm1-tb 07flz-rsm1-tb 08flz-rsm1-tb 09flz-rsm1-tb 10flz-rsm1-tb 11flz-rsm1-tb 12flz-rsm1-tb 13flz-rsm1-tb 14flz-rsm1-tb 15flz-rsm1-tb 16flz-rsm1-tb 17flz-rsm1-tb 18flz-rsm1-tb 19flz-rsm1-tb 20flz-rsm1-tb 21flz-rsm1-tb 22flz-rsm1-tb 23flz-rsm1-tb 24flz-rsm1-tb 25flz-rsm1-tb 26flz-rsm1-tb 27flz-rsm1-tb 28flz-rsm1-tb 30flz-rsm1-tb 2.5(.098) 3.0(.118) 3.5(.138) 4.0(.157) 4.5(.177) 5.0(.197) 5.5(.217) 6.0(.236) 6.5(.256) 7.0(.276) 7.5(.295) 8.0(.315) 8.5(.335) 9.0(.354) 9.5(.374) 10.0(.394) 10.5(.413) 11.0(.433) 11.5(.453) 12.0(.472) 12.5(.492) 13.0(.512) 13.5(.531) 14.5(.571) 16.0(.630) 8.9(.350) 9.4(.370) 9.9(.390) 10.4(.409) 10.9(.429) 11.4(.449) 11.9(.469) 12.4(.488) 12.9(.508) 13.4(.528) 13.9(.547) 14.4(.567) 14.9(.587) 15.4(.606) 15.9(.626) 16.4(.646) 16.9(.665) 17.4(.685) 17.9(.705) 18.4(.724) 18.9(.744) 19.4(.764) 19.9(.783) 20.9(.823) 22.4(.882) 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 contact: phosphor bronze, tin/lead-plated slider housing: nylon 46, ul94v-0 (black) receptacle housing: nylon 46, ul94v-0 ( )flz-sm1-tb, gray ( )flz-rsm1-tb, natural solder tab: phosphor bronze, tin/lead-plated normal type reverse type note: the products listed above are supplied on embossed tape.
494 connector 5.1(.201) 5.1(.201) b a 3.6(.142) 0.5(.020) 1.9 (.075) 0.2 (.008) 0.7 (.028) hjst 0.2 (.008) 0.7 (.028) 1.9 (.075) b a 3.6(.142) 0.5(.020) hjst cir- cuits model no. normal type reverse type dimensions mm(in.) ab q'ty / reel material and finish 13 30 32 34 36 40 42 45 50 30flz-sm1-r-tb 32flz-sm1-r-tb 34flz-sm1-r-tb 36flz-sm1-r-tb 40flz-sm1-r-tb 42FLZ-SM1-R-TB 45flz-sm1-r-tb 50flz-sm1-r-tb 13flz-rsm1-r-tb 32flz-rsm1-r-tb 34flz-rsm1-r-tb 36flz-rsm1-r-tb 40flz-rsm1-r-tb 6.0(.236) 14.5(.571) 15.5(.610) 16.5(.650) 17.5(.689) 19.5(.768) 20.5(.807) 22.0(.866) 24.5(.965) 13.1( .516) 21.6( .850) 22.6( .890) 23.6( .929) 24.6( .969) 26.6(1.047) 27.6(1.087) 29.1(1.146) 31.6(1.244) 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 contact: phosphor bronze, tin/lead-plated slider housing: nylon 46, ul94v-0 (black) receptacle housing: nylon 46, ul94v-0 ( )flz-sm1-r-tb, gray ( )flz-rsm1-r-tb, natural solder tab: phosphor bronze, tin/lead-plated normal type reverse type flz connector note: 1. the products listed above are supplied on embossed tape. 2. 45flz-sm1-r-tb and 50flz-sm1-r-tb are not csa approved.
495 flz connector taping specifications feeding direction ( + .098 -.039 [13(.512)dia.] w1 +2.5 - 1.0 ) 330 2.0(12.992 .079)dia. 2.0 0.5 (.079 .020) feeding direction cover tape carrier tape [6.75 (.266)] w 0.3(.012) 1.55 0.05 (.061 .002)dia. 4.0 0.1 (.157 .004) 2.0 0.1 (.079 .004) 12.0 0.1 (.472 .004) 1.75 0.1 (.069 .004) f 0.1 (.004) feeding direction cover tape carrier tape s 0.1(.004) 4.0 0.1 1.55 0.05(.061 .002)dia. (.157 .004) 2.0 0.1 (.079 .004) 12.0 0.1 (.472 .004) 1.75 0.1 (.069 .004) w 0.3(.012) f 0.1 (.004) feeding direction cover tape leader carrier tape the end part 160(6.299)min. connector mounting part 400(15.748)min. leader part 100(3.937)min. note: 1. specifications conform to jis c 0806. the tape width, connector recess dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. 2. specifications are subject to change without prior notice. circuits taping dimensions mm(in.) fsw reel dimen- sions mm(in.) w1 q'ty / reel 6 to 8 9 to 24 25 to 30 32 to 50 7.5(.295) 11.5(.453) 14.2(.559) 20.2(.795) 28.4(1.118) 40.4(1.591) 16.0( .630) 24.0( .945) 32.0(1.260) 44.0(1.732) 17.5( .689) 25.5(1.004) 33.5(1.319) 45.5(1.791) 2,000 2,000 2,000 2,000 (25 to 50 circuits) (6 to 24 circuits) lead section dimensions of ffc and fpc 3.0(.118)min. [5.5(.217)] base layer conductor [0.5(.020)x(number of circuits +1)] 0.05(.002) reinforcing layer cover layer [0.5(.020)x(number of circuits -1)] 0.03(.001) 0.35 0.04 (.014 .002) 0.5 0.1 (.020 .004) 0.5 0.03 (.020 .001) (.012 .001) 0.3 0.03 0.5 0.1 (.020 .004)
496 pc board layout (viewed from component side) and assembly layout 4.6(.181) 2.0(.079) [0.7(.028)] 2.05(.081) 1.55(.061) 1.5 (.059) 0.4 (.016) 1.65 (.065) 5.1(.201) 0.7(.028) fpc fpc 0.6(.024) 0.3 0.05(.012 .002) 0.5 0.03(.020 .001) 3.75(.148) [2.95 (.116)] 1.2 0.1 (.047 .004) 2.5 (.098) min. 0.5 0.03 (.020 .001) 0.35 0.05 (.014 .002) 3.3 0.1 (.130 .004) 0.35 0.1(.014 .004) 2.1 0.1 (.083 .004) 2.85 (.112) 2.0(.079) note: 1. tolerances are non-cumulative: 0.03mm( .001" ) for all centers. 2. the dimensions above should serve as a guideline. contact jst for details. (13 to 50 circuits) (6 to 33 circuits) flz connector
|
